Worldwide Delivery Available
UK Based Store
Customer Service

Bolt 1/4"UNF x 1.1/4" (Sheradized) 256001 (BH604101L)

Bolt, 1/4"UNF x 1.1/4".  Part number: 256001  (BH604101L)Finish: SheradizedNew old, UK manufactured stock.Applications 2.6l engine fan to water pump, Brake connector to chassis bracket, accelerator cross-shaft lever clamp bolts...

£0.35 Ex Tax: £0.29

Land Rover Series 1 Iso-Speedic Governor Bracket to Thermostat Housing Stud 232955

Land Rover Series 1 special thermostat housing studs for mounting the Iso-Speedic Governor bracket to the engine. Corresponds to part no: 232955Fits both 1600cc & 2l IOE engines when used in conjunction with part no: 219508. Fitted as standard on engines numbered 860001 to 06111605.Manufact..

£9.99 Ex Tax: £8.32

Land Rover Series 1 Iso-Speedic Governor Operating Rod Ball Joint 219065

Ball joint for Land Rover Series 1 Iso-Speedic Governor operating rod.  Part number: 219065  BSF thread so not suitable for Series 2, 2a 3 type governor...

£10.39 Ex Tax: £8.66

Land Rover Series 1 Iso-Speedic Governor Special Mounting Nuts 219508

Land Rover Series 1 special nuts for mounting the Iso-Speedic Governor to the thermostat housing.Part no: 219508Sold as a set of 3.Fits both 1600cc & 2l IOE engines when used in conjunction with part no: 218397..

£12.48 Ex Tax: £10.40

Land Rover Series 2 2a 3 Iso-Speedic Engine Governor to Carburettor Control Rod 504287

Land Rover Series 2 2a 3 Iso-Speedic engine  governor to carburettor control rod.  Part no: 504287Condition: refurbished...

£99.98 Ex Tax: £83.32

Land Rover Series 2 2a 3 Iso-Speedic Governor Jockey Pulley Bearing 235860

Jockey pulley bearing for Land Rover Series 2 2a 3 Iso-Speedic governor system.  Part no: 235860  ..

£36.00 Ex Tax: £30.00

Land Rover Series 2 2a 3 Iso-Speedic Governor Special Cylinder Head Bolts 278533

Special cylinder head bolts for mounting the Iso-Speedic Governor to the 2.25l petrol cylinder head.Corresponds to part no: 278533Sold as a pairManufactured to original specification including tensile rating and phosphated finish...

£39.98 Ex Tax: £33.32

Land Rover Series 2 2a Iso-Speedic Engine Governor Throttle Quadrant 508690

New old stock Land Rover Series 2 & 2a Iso-Speedic engine governor throttle quadrant.  Part no: 508690..

£164.99 Ex Tax: £137.49

Land Rover Series 2a 2.25 Iso-Speedic Engine Governor 530626

New old stock Iso-Speedic engine governor suitable for the 2.25 petrol engine.Part no : 530626Fits Series 2a vehicles upto Suffix H inclusive (for vehiceles with Solex carb)Dusty and some marks from storage. Will not fit Land Rover Series 1's...

£600.00 Ex Tax: £500.00

Land Rover Series 2a 3 2.25 Iso-Speedic Engine Governor 557766

New old stock Iso-Speedic engine governor suitable for the 2.25 petrol engine.Part no : 557766Fits vehicles from Series 2a Suffix J on and Series 3 (Vehicles fitted with ZENITH Carb)Dusty and some marks from storage. Will not fit Land Rover Series 1's...

£499.99 Ex Tax: £416.66

Land Rover Series 2a 3 2.25l Petrol Engine Double Crankshaft Pulley 530130

New old stock Land Rover Series 2a 3 2.25l petrol engine double crankshaft pulley.  Part no: 530130  Used in conjunction with the 8 blade fan & Iso-speedic engine governor...

£108.98 Ex Tax: £90.82

Land Rover Series 2a 3 Double Water Pump Pulley 530304

New old stock Land Rover Series 2a 3 double water pump pulley.  Part no: 530304Used in conjunction with the 8 blade fan and Iso-speedic engine governor...

£41.69 Ex Tax: £34.74

Land Rover Series 2a 3 Iso-Speedic Engine Governor Jockey Wheel Support Bracket 531737

Land Rover 2.25l engine Iso-Speedic engine governor jockey wheel support bracket.  Part no: 531737  For Series 2a & 3 only, not for Series 2 151 prefix engines.Also can be used as the right hand mounting bracket for the Aeroparts capstan winch drive shaft bearing block.Condit..

£38.05 Ex Tax: £31.71

Land Rover Series 2a 3 Iso-Speedic Engine Governor Mounting Bracket 530647

Land Rover Series 2a & 3 Iso-Speedic engine governor bracket for the 2.25l petrol engine.  Part no: 530647  Please note: This part will not fit the Series 2 151 prefix engines with the early cylinder head. The bracket is used but has been shot blasted and powder-coated i..

£83.40 Ex Tax: £69.50

Land Rover Series 2a 3 Iso-Speedic Engine Governor to Throttle Quadrant Operating Rod 559699

New old stock Land Rover Series 2a 3 Iso-Speedic engine governor to throttle quadrant front half of the operating rod.  Part no: 559699For Series 2a vehicles from engine suffix J onwards (engines fitted with Zenith carb)..

£27.49 Ex Tax: £22.91

Nut 5/16"UNF (Sheradized) 254811 (NH605041L)

Plain full nut, 5/16"UNF.  Part number: 254811 (NH605041L)Finish: Sheradized..

£0.14 Ex Tax: £0.12

Set Bolt 1/4"UNF x 3/4" (Sheradized) 255207

Set Bolt 1/4"UNF x 3/4"  Part number: 255207  Finish: Sheradized  Quality old stock ATBO manufacture.Various applications..

£0.14 Ex Tax: £0.12

Set Bolt 5/16"UNF x 1" (Sheradized) 255228

Set bolt, 5/16"UNF x 1".  Part number: 255228  Finish: Sheradized  Quality old stock, UK manufacturerVarious applications...

£0.30 Ex Tax: £0.25

Shakeproof Washer 1/2" (External Teeth) 73353

Shakeproof washer 1/2" internal diameter with external teeth.  Part no: 73353Please note: this is a correct imperial sized shakeproof washer not a metric equivalent...

£0.19 Ex Tax: £0.16

Aeroparts Capstan Winch Driveshaft Bracket Stud for 2.25l Engine 252511

Aeroparts Capstan Winch driveshaft support brackets to engine stud.Corresponds to part no: 252511For, AEH.D & AEH.FW' series of winches fitted to the 2.25l engine only. Four required per winch...

£2.09 Ex Tax: £1.74

Showing 1 to 20 of 20 (1 Pages)

Never miss an offer. Ever.