LR Optional Equipment

Product Compare (0)

Sort By:

Show:

Fairey Winch Drive Shaft Key FWL-128-A4 FWL-246

Key for Fairey capstan & PTO drum winch driveshaft. Part no: FWL 128-A4 (FWL-246)..

£1.20 Ex Tax: £1.00

Fairey Winch Oilite Thrust Washer FWL-116-A4

Fairey capstan winch & drum winch PTO Oilite thrust washer. Corresponds to part no: FWL-116-A4 Fits between the driveshaft spring and the 'ball' of the driveshaft and also is used on the selector shaft mechanism of the capstan winch. 3 requires per capstan winch.Fits on the..

£4.08 Ex Tax: £3.40

Fairey Winch Serial Number Plate (Late) FWL-PLATE-RED

Reproduction Fairey winch serial number plate. Late red type. Corresponds to part no: FWL-PLATE-REDUsually found on 4000lb Fairey capstan winches manufactured from the mid 1970's onwards. ..

£14.99 Ex Tax: £12.49

Fir Tree Cable Tie Cleat Size B (80mm) 240429

Fir Tree Cable Tie Size B (80mm). Part no: 240429..

£2.20 Ex Tax: £1.83

Fir Tree Cable Tie Cleat Size C (125mm) 240430 (RTC222)

Fir Tree Cable Tie Cleat Size C (125mm). Part no: 240430 (RTC222)..

£3.06 Ex Tax: £2.55

Fir Tree Cable Tie Cleat Size D (155mm) 240431

Fir Tree Cable Tie Cleat Size D (155mm). Part no: 240431..

£3.17 Ex Tax: £2.64

Front Apron Canvas Rest Strip Series 2 2a 60MY-Dec 63 332656

Canvas rest strip for the later Series 2 / 2a flat front apron withall alloy construction (part no: 332640) as fitted from 1960MY to December 1963Part no: 332656..

£3.60 Ex Tax: £3.00

Front Apron Canvas Rest Strip Series 2 58-59MY 332520

Canvas rest strip for the early Series 2 front apron with the galvanised front edge (part no: 330451) as fitted to 58 - 59 MY. Part no: 332520..

£5.04 Ex Tax: £4.20

Front Apron Fitting Kit Series 2 58MY - 59MY (Flat Type With Galvanised Edge) LROE_FP_004

Front apron fitting kit Series 2 58MY - 59MY. For fitting the early flat type panel with the galvanised front edge part no 330451 to the three brackets under the radiator panel and to the front bumper.Part no: LROE_FP_004 Finish: Sherardized ..

£3.19 Ex Tax: £2.66

Front Bumper to Chassis Fitting Kit Series 2 2a Suffix A - C LROE_CH_002

Front Bumper to Chassis Fitting Kit Series 2 2a Suffix A - C. Part no: LROE_CH_002 Finish: Sherardized..

£7.44 Ex Tax: £6.20

Front Bumper to Chassis Fitting Kit Series 2a Suffix D - G 3 LROE_CH_003

Front Bumper to Chassis Fitting Kit Series 2a Suffix D - G & Series 3. Part no: LROE_CH_003..

£5.33 Ex Tax: £4.44

Front Curved Apron Special Screw 78796 78795

Front curved apron special screw. Part no: 78796, 78795. BZP finish as per original specification. NOTE: To fit later apron mounting bracket part no: 345192 from c.1967 onwards. Original screws were 'thread-forming' therefore if fitting to a new bracket or chassis a ..

£0.65 Ex Tax: £0.54

Front Panel to Chassis Rubber Spacer 90306465

Front Panel to Chassis Rubber Spacer.Part no: 90306465..

£1.01 Ex Tax: £0.84

Front Stub Axle Bush 217354

Front stub axle bush for early type stub axle. Part no: 217354..

£4.96 Ex Tax: £4.13

Front Stub Axle to Swivel Housing Gasket 277289

Front Stub Axle to Swivel Housing Gasket. Part no: 277289..

£0.60 Ex Tax: £0.50

Fuel Pipe 1/4" OD x .170" ID (Ethanol Resistant) 564907 564962 564905 NRC25

Ethanol resistant black nylon replacement fuel pipe. 1/4" od x 0.170" id. Part no: 564907 564962 564905 NRC25Priced per meter. Pipe does not include any fittings or fixings, you will need to use your existing fittings. As used for the spill pipes on 2.25l diesel vehicles...

£3.36 Ex Tax: £2.80

Fuel Pipe 5/16" OD x 1/4" ID (Ethanol Resistant) 552435 552436 587686 599447 564898 552436 564902 564899

Ethanol resistant black nylon replacement fuel pipe. 5/16" od x 1/4" id. Part no: 552435 552436 587686 599447 564898 552436 564902 564899. Priced per meter. Pipe does not include any fittings or fixings, you will need to use your existing fittings. As used for th..

£3.60 Ex Tax: £3.00

Fuel Tank Sender Gasket 546488 (56398) (RTC1148)

Showing 121 to 140 of 476 (24 Pages)